i just got this tractor mod. 917.23502 or it could be 917.25502 serial 17511 it says on the front by the head lights (ss12) under that (special) on the side (super 12) by the key switch it says (suburban 6 speed) any imformation as possible pictures would be apprecia...
Hitractor lovers. I hate to part with these vintage babies,but they must go. Have too many. I have four (4): 1- 6 custom elec. start, 1- 6 custom pull start and 2- 8 custom pull start. have 3- mower decks, 1 sno-blade, 3- extra engines and 2 parts tractors (1 complet...
I just purchased a 1966 Custom 6 (917 99810) over the weekend, it runs and operates well but could use a new set of belts and some minor tinkering. Looking for a parts source - any ideas? Also, would like to convert throttle to foot-operated if possible. This trac...
I have a 1965 Suburban 8 that needs a new home or some help on the clutch control system. It ran great but could never get the clutch adjusted right to get neutral. Just forward OR reverse. I've had it apart a couple times to try to repair the situation but I can't f...
Hello Sears lovers.I'm hoping somebody can tell me if
it's possible to transplant a SS12 hydro transaxle into
a Sears ST10.I want to put an Onan CCK 12.5 into my ST10
with a Hydro unit from an SS12.Any thoughts on this.Also,I was wondering if the ST10 steering sha...
I'm looking for a engine or a rebuilt kit for my 1969 sear tractor. It currently has a Tecumseh 7 Hp motor Model # 143-602022 Serial # 9269 any help would be appreciated. Thanks
After my tractor runs for about 5 min I have to keep choking it to keep it running. After it cools down it runs good again until it heats up. I do have a electric fuel pump on it.
hi. my dad has an old GT 18 twin. i put a new battery in it today. i got some clicking and a buzz, but it would not turn over. this fine tractor ran great last summer. i checked the 15 and 30 amp fuses which were ok. the lights were bright when i turned them on. i...
Hello I have a craftsmsn model 917.253741 I am lookimg for a book to tell me how the drive belt goes back on mine broke but have no clue on how the new one goes back on any help will be greatly appreciated even a copy of a manual would help I will pay my email, is tr...
I have an ST/12 - Model 917.25733, and would like to know how I can confirm if a model 842.260030 36" snowblower will fit. Any answers or guidance to a cross refference list of some type is trully appreciated. Thank You.
Im looking for sears attachments that we do not already have! would prefer in or around ohio, would consider shipping/delivery?
what we are looking for-- flail mower, rotary/sweeper, self powered sweeper, 3&5 gang mowers, front mount pto's, estate sprayer, spike...
www.gphpoe.com
For your complete CARBURETOR KIT, COMPLETE WITH INTAKE GASKET SET TO COMPLETE THE JOB CORRECTLY. Also brass float. THIS FLOAT REPLACES THE FIBER FLOAT
Gary is good GUY to deal with.
I just acquired this tractor and it seems interesting but I have never dealt with this type of garden tractor/lawn mower and I have seen photos with and without cutting decks. Are these tractors valuable when restored or should I leave it in its original condition?
Hello Sears lovers.Can anybody tell me if the steering bushings that Sears Parts is selling on the internet for the ST10 steering shaft will work on the ST16 steering shaft also.The Sears site doesn't carry the bushings for the ST16 shaft anymore.What about the upper...
have for sale a sears FF24 hydrodrive,onan engine has a broken connecting rod,have piston and rod out,but cannot locate.have all engine sheetmetal and mower deck,has 3 point setup with attachment brackets on front.HAS ALL LABLES AND NUMBERS.interested contact me at -...
I have a Vintage 16 hp 2 cylinder roper lawn tractor with a 44 inch deck .It has a new starter and a snow blower.This Tractor is in gem condition.It's a work horse.I'm selling it if your interested E-Mail me and i will send you some pictures.
I will trade for a...
SEARS CRAFSMAN FF24 HYDRODRIVE,ONAN ENGINE HAS A BROKEN CONNECTING ROD.HAVE ALL MOTOR SHEET METAL.ALSO HAVE THE MOWER ALL BELIEVED TO BE A 1968.I BOUGHT IT THIS WAY AND CANNOT FIND THE RODS ALL IN GOOD CONDITION,HAVE PICTURES. EMAIL FOR MORE INFO:
I have a Sears flail mower Id like to sell, from what I've seen and was told there where few made. Its all original except for the new hydrulic hose and it also works. I have the hand pump thats mounts on the tractor. It does not have the weight transfer spring tab...
I RECENTLY FOUND A HYDRO-TRAC 12 IN A STORAGE BUILDING .. MOWER IS IN GOOD SHAPE .. SPARK PLUG AND STEERING LINKAGE ARE MISSING .. I THINK IT IS A 1969 MODEL .. ONLY NUMDERS I COULD READ WERE 25500 .. WHAT NUMDER SPARK PLUG GOSE IN THE MOWER AND WHERE CAN I FIND THE...
I RECENTLY FOUND A HYDRO-TRAC 12 MOWER IN MY GRANDPAS STORAGE BUILDING .. I THINK IT IS A 1969 MODEL .. I WAS TOLD IT WAS RUNNING BEFORE STORING.. THE FRONT STEERING LINKAGE IS MISSING AND THERE IS NO SPARK PLUG .. I NEED TO KNOW WHAT SPARK PLUG GOSE IN IT AND WHERE...
Has anyone have any details or a manual on a 1947 handyman? It has a steel mower deck & gear shift levers & two brake levers & ag-tires on rear with a 11-horsepower engine which i'm sure was a replacement motor
Hello all,
I'm in need of some help. I have "i think" a 1968 suburban, and i have been trying to find a wiring diagram. But so far no luck. I would greatly appreciate any help given.... and by the way GREAT SITE..... LOVE ALL THE PICS.
thanks
I HAVE A 1976 ST/12 AND IT IS BOGGING DOWN A LOT WHEN I AM USING THE SNOW THROWER. MIND YOU, I HAD ABOUT 10" OF SNOW BUT I USED IT A COUPLE DAYS LATER WHEN THERE WAS ONLY ABOUT 5" AND IT STILL BOGGED DOWN. I ADJUSTED THE CARB TO SEE IF THAT WOULD HELP BUT IT DIDN'T....
I have a 1971 sears custom 10xl and it starts but I have to jump it every time,I thought maybe it was the altenator but someone told me that if that was the problem it wouldn't run.Once I jump the tractor it runs all day if I wanted it to but as soon as I turn it off...
I recently acquired a 65 Suburban with a snow plow and 3 blade mower deck. What a awesome little tractor. I am wondering if a bagger attachment is available for the mower deck so I can use this in my neighborhood. Any ideas would be great. By the way - thanks for t...
I have a 1969 sears hrdo-trac 12 for sale.great shape. runs great,I mowed my lawn with it today(50") deck.also have the trailer(1969) exclent shape. Snow plow(rusty). plus any parts I my have
Does anyone know where to get replacemnt blades for an old Sears 48" deck, (3) blades, 16.5" long, 2.5" wide, 5/8" center hole, (2) 5/16" guide holes, 1 3/8" apart? Thanks ahead of time.
Wondering if anyone knows the size for the main drive belt. Pieces I have left look like a B but I don't have anything left to get the length.
Thanks for your help
I have the following for sale in Monroe, NC near Charlotte, NC:
Sears # 917 60605 Mold Board Plow
Sears 917 25320 Cultivator
Seas 917 253060 Old Style 3 point hitch
A homemade device that I guess you'd call a box plow
All items are in pretty good shape, still...
Should the main axle move in and out? When standing in front of the mower and looking at the front, the wheel on the left side is out past the fender and the wheel on the right side is in as far as it will go and rubbing the inside of the fender. Whats wrong with it?
I am rebuilding an old ss/14 and can not figure out where the belt tensioner springs hook to. I know where they go on the tensioner itself but what the other end hooks to I am lost. Any help would be greatly appreciated. Thanks
I received a Craftsman II, 16.5 hp all wheel steer garden tractor free from a friend. I have no info on the unit and would like to know what year the tractor is. I know it is not of vintage age, but have been looking at this site for some time and knew you guys wou...
Hello all.Thanks a bunch for reply on last post.I've
got another problem though.Fuel tank on my st16 is rusty inside,especially on the sides.Looks to be
flaky type of rust.Anybody got ideas what is the best
way to get rid of the stuff,other than getting another
t...
I have a nice ST/12 that never recharged the battery.I finally decided to try to fix it.Underneath the instrument panel is a finned aluminum box,I don't know if it is a rectifier or what?The three wire connection has gotten hot and was not connected and there are som...
I have been a member of thesearsgardentractorgroup on Yahoo for a while. I see you have agreed to be a Moderator on this group. I was given a probably 1983 GTV16 and have been trying to find information on it. I wonder if you would have anything, it is model 917.2537...
Hello to sears tractor lovers.I need to know if the
older cast iron Onan CCK 16HP twin cylinder engines that have a max rpm of 1800 would be a suitable engine for mowing with in a sears tractor such as the
ST16.I've found one for sell,but am hesitant because
of...
when the engine is running at full throttle, and getting hotter and hotter, it begins to backfire, and when the throttle is lowered the engine runs better. but as it really gets hot, it shuts down, even at idle. I put new points and condenser in, went through and reb...
I have a ss16 tractor and want to replace the oil in the transaxel. Under the hood is says to use 30# MS or MM. I have not been able to find it. What is the correct oil to install? 30# detergent or 30# non-detergent? or something else? The oil I drained out was...
Do you have on your site a better picture of the Voltage Regulator Starter Wireing? Or do you have a readable repair manual (preferrably with photos) for the tractor? Sears Super 12 Garden Tractor Model # 917.25311. Please E-Mail me SASP. Thanks